You type the
mould n° THE MACHINE SETS AUTOMATICALLY
• Vacuum on or off
• Position manual or automatic
(WITH OR WITHOUT THE CLAMP)
• Tank temperature DEGREES
C XX,X
• Injector temperature
DEGREES C XX ,X
• Tank pressure BARS X
,XX
• Clamp pressure BARS X
,XX
• Level of vacuum
• Time for the clamp to go
MINUTES, SECONDES, DIXIEMES
• Time under vacuum MINUTES,
SECONDES, DIXIEMES
• Injection time MINUTES,
SECONDES, DIXIEMES
• Cooling time MINUTES,
SECONDES, DIXIEMES
|
Important
: The machine memorizes the melting
point of the wax used and adjusts systematically
the injection temperature
The
parameters are set on the board of the machine
Simple
to use, just type the number on the keyboard,
the machine shows the position of
the mould (height), and adjusts automatically
all the parameters for the injection with
high precision..
Shrinkage
: the shrinkage is reduced, thanks to
the high precision of the pressure parameters
which is constantly controled by the software
|
