| |
|
| |
Maxmatic injector 3000, entirely automatic : it
takes the mold in front of the nozzle, injects,
and goes back without any rejects.
|
| |
A new technology which will change the
process of wax injection, to work faster 1000 waxes/day
per operator, with several workers on the machine .
A MICRO CHIP IS IN EACH MOLD. A great step
in the technology of the wax injectors.
|
|
| Advantages
|
| |
• 100 % successful
• No different weight on your waxes
• Exactly the same dimensions and volumes
• No rejects.
• Run entirely by a software
• It recognizes each mold and sets it
in front of
the nozzleof the injector to the
100th of mm
• It reads the data of the micro chip
in the mold
• Each micro chip in each mold has its
memory.
• This memory can be modified or increased
at
anytime.
It stocks and gives all the instructions for
each injection according to each mold :
|
1- PARAMETERS ATTACHED TO
THE TYPE OF THE MOLD :
• Horizontal
position X - vertical position Y
• Vacuum
on or off (active or not)
• Position automatic
or manual (with or without the clamp)
|
2 – PARAMETERS ATTACHED
TO THE TYPE OF THE WAX :
|
| Tank temperature Degrees
C(xx,x) |
Injector temperature Degrees
C (xx,x ) |
| Tank pressure Bars (x,xx
) |
Clamp pressure Bars (x,xx
|
| Level of vacuum 2 mbars
abs depending the pump |
Time for the clamp to go
Minutes, seconds,10th/se |
| Time under vacuum Minutes,
seconds, 10th/se |
Injection time Minutes,
seconds,l0th/se) |
| Cooling time Minutes, seconds,10th/se
|
Memories of the position of the
mold (3 axis) |
VERY IMPORTANT :
the injector considers the melting point of
the wax
|
|
3 –
PARAMETERS OF EACH MOLD :
•
Mold N° finger N°
• Date of the
mold
• Name of the owner
• Weight
of the wa x Etc…
• All these
settings are typed on a board
• All these
parameters can be red, recorded an
modified
• The functioning is very
simple. You just need
to read a
mold, to place it on its support and to valid:
AND THE INJECTION IS AUTOMATIC
• The weight variations are imperceptible
due to the innovative technology of the machine |
| |
| |
|
|
|
