|
|
 |
|
|
 |
|
Inquiry |
|
| |
 |
| |
Ti Research |
| |
| Principle
of Operation |
Cast
made by Ti-Research is a centrifugal casting device
for the production of precision castings. The
device is suitable for all kinds of castable materials.
The scope of usage reaches from technical products
for further processing, jewelry and dental appliances.
For the production of castings made of metal,
precious and non-precious alloys may be used.
The device is designed for melting of metals by
flame with a suitable torch which |
|
| |
provides the best means for controlling the melting
process.
With a small and a large metal ring for different sizes
of moulds various sizes of parts or different numbers
of castings may be produced. For the casting of dental
parts, for example 40 and more crowns and/or bridge
elements may be produced with a mould in the small ring
and three or more partial frames may be casted with
a mould in the large ring in one cast. For jewelry the
amount of parts depends on their design and size and
is limited by the crucible capacity.
The operation of Cast is based on a patented process
where balancing of the rotating part is not necessary.
Despite of the extraordinary small dimensions the device
allows the production of more parts in one process than
any other competitors‘ dental casting device today available
on the market.
Cast is distinguished by ease of use and the extraordinary
small size and is the first choice for locations with
limited workspace.
The device comprises of a special safety mechanism to
protect the user by activating a mechanical brake while
opening the top lid and switching off the power to protect
from accidental restart.
The device meets all applicable safety standards. Nevertheless
care has to be taken to prevent dangerous situations
during operation.
For safe operation of the device, this instruction
manual is to be readprior to the first usage and the
instructions given here are to be obeyed. |
| |
|
| Specifications |
|
| Dimensions |
|
| Diameter: |
170
mm |
| Height: |
270
/ 320 mm |
| Weight: |
8,5
Kg |
| |
|
| Power |
|
| |
EU |
US |
| Voltage: |
230V |
115V |
| Frequency: |
50Hz |
60Hz |
| Power
Consumption: |
30W |
40W |
| Rotation
Speed: |
930
min-1 |
850
min-1 |
| |
|
|
| Environment |
|
| Temperature
Range: |
5 0C. To 40 0C. |
| rel.
Humidity: |
90% @ 20 0C. |
|
| |
Intended
Use
The usage of Cast by Ti-Research
is intended for the production of castings with the
centrifugal casting principle by qualified users only.
Any other application is not intended use and not permitted.
Ti-Research is not liable for damages resulting of not
intended use. Not intended use is any use not mentioned
in this instruction manual.
All local regulations for safety at work and
accident prevention are to be obeyed for operation.
Electrical Safety
Prior to the connection it is to be verified
that the local power supply, i. e. voltage and frequency
meets the technical specifications of the device.
The device may be connected to a power outlet with protection
earth contact and a leakage current safety switch with
FI < 30mA only. Care has to be taken for the power
cord is not subject to mechanical tension.
For maintenance or repair purposes the device is to
be disconnected from power supply by pulling the power
plug out of the socket.
Repair of the device is to be carried out by the manufacturer
or persons appointed by the manufacturer only.
Ti-Research is not liable for damages resulting of improper
work.
After repair-work on electrical parts of the device
an insulation test and protection earth inspection is
to be carried out by a certified electrician.
Safe Operation
During operation heat sensitive parts have to be kept
in a sufficient distance from the device.
Combustible, inflammable and explosive substances are
to be kept away from the device during operation.
Do not touch hot parts, i. e. the crucible, crucible
holder, top lid, mould, etc..
Handling of preheated moulds while inserting into or
removing from the mould holder may cause danger of burning.
For the safe handling of moulds the specially shaped
mould pliers has to be used.
Ti-Research For the usage of torches the local safety
regulations and precautions are to be obeyed. In case
of defects or damages resulting in dangerous conditions
for use the device is to be disconnected from the power
supply and to protect against accidental use.
Production of Casting
|
| |
| For more details -
Please visit
www.ti-research.com |
|
|
|
|
|
